PROCEDURE FOR INITIAL PRODUCTION PART(IPP) - Explained
PROCEDURE FOR INITIAL PRODUCTION PART(IPP) Quantity considered for Initial Part /Pilot Lot for submitting to the customer is as required by Customer. First Production Parts (Initial Part /Pilot Lot) are identified by special identification tag called Initial Part Tag to differentiate those from normal parts for in-house (Identified by Internal IPP Tag) and at Customer End (IPP Tag). All Characteristics specified in drawing are checked for minimum 5 parts each lot & recorded in IPP Inspection Report & list of all Initial Parts are recorded in Initial Part Log Book. Inspection Reports and other reports as per Customer Requirement for each initial part/lot if any is kept properly and submitted to Customer and approval is taken if required. If Samples /IPP gets rejected by Customer, then the non-conformity procedure will be applicable and parts will be scrapped both at in-house and Customer end. Machine used for production of Initial Parts to be identified with IPP Board. Initial P...